Accessories that fit Bambu Lab P1S

Bambu Lab explicitly supports AMS 2 Pro multi-material printing on P1-series printers; drying requires the documented external adapter.

Required specification: Use the P1/X1 upgrade cabling; an external adapter is required for the drying function.

Bambu Lab documents AMS HT support for P-series printers when connected with the required coupler, cable, and filament buffer.

Required specification: Requires the documented PTFE coupler, 4-pin cable, and Filament Buffer for one-unit P-series use.

The official compatibility table includes P1 Series for the 256 × 256 mm Bambu Textured PEI Plate.

Bambu Lab provides P1-series installation instructions for the 256 × 256 mm dual-texture plate.

Bambu Lab marks this hardened-steel extruder gear assembly as compatible with the P1 Series.

Bambu Lab marks the stainless steel extruder unit as P1 Series exclusive.

Bambu PLA Basic is an official 1.75 mm filament with Bambu printer profiles and broad hotend compatibility.

Bambu PETG HF is an official high-flow 1.75 mm filament and its accessory table supports every hotend size and material.

Required specification: Dry before use following Bambu Lab's published PETG HF drying guidance.

Bambu Lab sells this official build-plate glue stick for its printer plates.

Bambu Lab marks the liquid glue as compatible with all series and all Bambu Lab build plates.

Bambu Lab offers the 0.4 mm hardened-steel complete hotend as a P1-series configuration.

Bambu Lab offers the 0.2 mm stainless-steel complete hotend as a P1-series configuration.

Required specification: Use for fine-detail materials that meet Bambu Lab's 0.2 mm filament restrictions.

Bambu Lab offers the 0.6 mm hardened-steel hotend/nozzle configuration for P1 Series.

Bambu Lab offers the 0.8 mm hardened-steel hotend/nozzle configuration for P1 Series.

Bambu Lab explicitly lists P1S compatibility for the activated carbon air filter.

Bambu Lab marks the front housing assembly as P1 Series exclusive.